1. Of course, the use of multiple valves can achieve a large amount of intake and exhaust; it also overcomes the problem of large mass inertia, which is conducive to improving vehicle power and high-speed operation. However, if the number of valves is large, the manufacturing process is complex, the technology is not up to standard, and the failure rate is high. If the technical conditions are mature, multi-valve is certainly better.

2. The automobile valve is on the upper part of the engine, at the top of the combustion chamber of the cylinder. The throttle is a controllable valve that controls the air entering the engine. After the gas enters the intake pipe, it will be mixed with gasoline to become a combustible mixture, which is burned to form work. The car valve is located in the upper part of the engine, at the top of the cylinder combustion chamber.

3. The car valve is located on the top of the engine and the top of the cylinder combustion chamber. The throttle is a controllable valve that controls the air entering the engine. After the air enters the intake pipe, it will be mixed with gasoline to become a combustible mixture, which is burned to do work. It is connected to the air filter at the top and the engine block at the bottom, and is called the throat of the car engine.

4. The intake valve is generally 15-20 wires, and the exhaust valve is between 25-30 wires. At present, most cars on the market use hydraulic valve lifters, which automatically adjust the valve clearance, which can basically eliminate this phenomenon. Of course, once damaged, it can only be replaced and cannot be adjusted. Hope the above answer can help you.

5. The function of the intake valve is to suck air into the engine and mix and burn with fuel; the function of the exhaust valve is to discharge the burned exhaust gas and dissipate heat. The following is the expansion information: Composition: The valve is composed of a valve head and a rod. The shape of the valve head has a flat top, a spherical top and a horn top.

6. As the name implies, the valve is the door for intake and exhaust. For the engine to work, it must have gasoline to burn, and for gasoline to burn, it must have air. The valve is the device that controls the intake and exhaust of the cylinder.